No image available
Bonded Rear Drum In-Hat Parking Brake Shoe Set - ACDelco (17725B)
No image available
- Sale Price: $47.78
Details
- Brand:
- SKU:
17725B
- GTIN: 00021625156965
- UPC: 021625156965
- Positions: Rear
- Other Names:
18039360
- Description: ACDelco Professional Parking Brake Shoes are a high quality replacement for many vehicles on the road today. For GM vehicle application, the chamfer angle and vane configuration follow the OE design. Also, no machining is required. ACDelco Professional Parking Brake Shoes are ready to be installed right out of the box. These premium aftermarket replacement parking brake shoes are manufactured to meet your expectations for fit, form, and function. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
parking-brake-shoe;brake-shoe;parking-brake;shoe; - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Additional Information
| Brand | ACDelco Professional |
| Brake Drum Diameter (in) | 7.087 |
| Brake Drum Diameter (mm) | 180 |
| Brake Shoe Width (in) | 1.122 |
| Brake Shoe Width (mm) | 28.5 |
| FAQ - Answer 1 | Yes, ACDelco Professional Brake Shoes come with a limited lifetime warranty. |
| FAQ - Answer 2 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
| FAQ - Answer 3 | Yes, ACDelco also offers GM OE brake pads and Advantage Brake Shoes. |
| FAQ - Answer 4 | No, but it is a good idea to inspect your brake shoes at each tire rotation. |
| FAQ - Question 1 | Are these brake parts durable? |
| FAQ - Question 2 | Do I have to replace all my brake parts when replacing my brake shoes? |
| FAQ - Question 3 | Does ACDelco offer other grades of brake shoes? |
| FAQ - Question 4 | Do I have to replace my brake shoes after a certain amount of time? |
| Features & Benefits - Bullet 1 | Quality validated for proper metallurgy and correct brake plate thickness |
| Features & Benefits - Bullet 2 | Non-directional brake surface finish for consistent braking |
| Features & Benefits - Bullet 3 | All shoes are machined for correct shoe-to-drum contact |
| Features & Benefits - Bullet 4 | Highest shear strength for the best bond integrity |
| Features & Benefits - Bullet 5 | Contour or cam ground to eliminate chatter and rear wheel lockup |
| Friction Material | Organic |
| Friction Material Attachment | Bonded |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 3.2 |
| Length (in) | 8.5 |
| Mounting Hardware Included | No |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Squealing or grinding noises. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Low brake pedal height. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake shoe signs of wear include: |
| Weight (lb) | 2.65 |
| Width | 1.12 28.45 |
Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|