| Brand | ACDelco GM Original Equipment |
| Easy Pour Container | Yes |
| FAQ - Answer 1 | Yes, ATF Type III (H) can be used in any vehicle that can use DEXRON-II or DEXRON-III fluid. |
| FAQ - Answer 2 | Yes, ATF Type III (H) can be used in any vehicle that can use DEXRON-II or DEXRON-III fluid. Refer to your owner's manual for the specific transmission fluid required by your vehicle. |
| FAQ - Answer 3 | Yes, DEXRON-VI is a suitable replacement. |
| FAQ - Answer 4 | No, transmission fluid is designed to last much longer than most engine oils. Always refer to your vehicle owner's manual to identify how often and when your transmission fluid should be changed. Severe usage and regular usage descriptions are provided. |
| FAQ - Answer 5 | Yes, contaminants most often come from metal filings or 'burnt' byproducts from extreme usage or fluid degradation over time. |
| FAQ - Answer 6 | Yes, inspect the fluid using the dip stick at every oil change to determine if degradation or contamination is occurring. |
| FAQ - Answer 7 | Yes, refer to your vehicle owner's manual for the specific fluid for your vehicle. |
| FAQ - Question 1 | Can ATF Type III (H) be used in a non-GM vehicle? |
| FAQ - Question 2 | My current transmission fluid is not on the above list - can I determine if ATF Type III (H) is a suitable ATF replacement for my vehicle? |
| FAQ - Question 3 | Can DEXRON-VI be used as a substitute for ATF Type III (H)? |
| FAQ - Question 4 | Does my transmission fluid need to be changed as regularly as my oil? |
| FAQ - Question 5 | Are there common causes of transmission fluid contamination? |
| FAQ - Question 6 | Are there preventative steps I can take to minimize contamination? |
| FAQ - Question 7 | Can I identify which transmission fluid(s) are applicable/appropriate for my vehicle? |
| Features & Benefits - Bullet 1 | Helps optimize the efficiency advantages of Continuously Variable Transmissions |
| Features & Benefits - Bullet 2 | Helps enhance transmission cooling function |
| Features & Benefits - Bullet 3 | Designed to protect metal surfaces from wear |
| Features & Benefits - Bullet 4 | Formulated to condition gaskets |
| Funnel Included | No |
| Good Maintenance Practices - Section 1 - Bullet 1 | Transmission fluid should be replaced when it becomes contaminated. Anything but transmission fluid in the transmission is considered a contaminant. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Always use the recommended type of transmission fluid in your vehicle, as referred to in your owner's manual. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Typical fluid change intervals for automatic transmissions vary depending on severity of the usage. See your owner's manual for maintenance schedules. |
| Height (in) | 2.5 |
| Length (in) | 9 |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Thermal stress |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Thin fluid from mechanical shearing |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Contamination by metals or other engine fluids |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Grinding or other abnormal noises from the transmission |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Difficult or slipping when changing gears |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Delays in vehicle movement |
| Signs of Wear & Troubleshooting - Section 1 - Header | Signs of wear for automatic transmission fluid include but are not limited to: |
| Weight (lb) | 1.97 |
| Width (in) | 4.4 |
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov 