Details
- Brand:
- SKU:
172-2726
- GTIN: 00808709422617
- UPC: 808709422617
- Positions: Front Right
- Other Names:
23399516
- Description: ACDelco GM Original Equipment Disc Brake Calipers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These calipers are hydraulic components mounted over the brake rotor. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
disc-brake-caliper;caliper;brake-caliper;disc-brake; - Condition: New
Additional Information
| Brand | ACDelco GM Original Equipment |
| Abutment Clips Included | No |
| Anti-Rattle Spring Included | Yes |
| Bleeder Screw Included | Yes |
| Bleeder Screw Quantity | 2 |
| Bleeder Screw Thread Size | M10 |
| Bleeder Thread Diameter | 10X1 |
| Brake Caliper Manufacturer | Brembo |
| Caliper Color | Black |
| Caliper Slides Included | No |
| Caliper Type | Fixed |
| Features & Benefits - Bullet 1 | Helps stop the vehicle when the brakes are applied |
| Features & Benefits - Bullet 2 | Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional |
| Features & Benefits - Bullet 3 | ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors. |
| Features & Benefits - Bullet 4 | GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle |
| Features & Benefits - Bullet 5 | GM regularly updates production and service part designs to integrate new materials and technologies |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Grade Type | Performance |
| Inlet Fitting Type | Straight |
| Mount Hole Diameter (in) | 0.55in |
| Mount Hole Diameter (mm) | 14mm |
| Mounting Bolt Included | No |
| Mounting Bracket Included | No |
| Mounting Hardware Included | No |
| PADB ID 2223 | 0.39 10 |
| Pad Wear Sensor Included | No |
| Pads Included | No |
| Piston 1 Diameter (in) | 1.65 |
| Piston 1 Diameter (mm) | 42 |
| Piston 2 Diameter (in) | 1.65 |
| Piston 2 Diameter (mm) | 42 |
| Piston 3 Diameter (in) | 1.65 |
| Piston 3 Diameter (mm) | 42 |
| Piston 4 Diameter (in) | 1.65 |
| Piston 4 Diameter (mm) | 42 |
| Piston Quantity | 4 |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|