| Brand | GM Genuine Parts |
| ABS Tone Ring Included | No |
| Bolt Hole Quantity | 5 |
| Brake Surface Finish | Non-Directional |
| Features & Benefits - Bullet 1 | Inspected for balance, resulting in smooth brake operation and noise reduction |
| Features & Benefits - Bullet 2 | Have a rust-preventative coating to help protect against corrosion |
| Features & Benefits - Bullet 3 | GM-recommended replacement part for your GM vehicle's original factory component |
| Features & Benefits - Bullet 4 | Offering the quality, reliability, and durability of GM OE |
| Features & Benefits - Bullet 5 | Manufactured to GM OE specification for fit, form, and function |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 5.3 |
| Length (in) | 14.1 |
| Outer Cooling Fins | No |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Squealing or scraping noises. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Weight | 13 |
| Width (in) | 13.3 |
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov 