| Brand | ACDelco Gold |
| Attachment Type | Bolted |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Cylinder Bore Diameter | 0.875 |
| FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
| FAQ - Answer 2 | Yes, ACDelco also offers GM OE brake cylinders. |
| FAQ - Answer 3 | Yes, ACDelco Professional Brake Cylinders come with a 12 month / unlimited mile warranty. |
| FAQ - Question 1 | Do I have to replace all my brake parts when replacing my brake cylinder? |
| FAQ - Question 2 | Does ACDelco offer other grades of brake cylinders? |
| FAQ - Question 3 | Are these brake parts durable? |
| Features & Benefits - Bullet 1 | Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality |
| Features & Benefits - Bullet 2 | Pressure tested to ensure safe and confident braking |
| Features & Benefits - Bullet 3 | Trivalent coated bleeder screws provide extra protection and added durability |
| Features & Benefits - Bullet 4 | Cast iron and aluminum specifications; no extra stress on the brake boosting mounting |
| Features & Benefits - Bullet 5 | Some ACDelco Gold parts may have formerly appeared as ACDelco Professional |
| Features & Benefits - Bullet 6 | Premium aftermarket replacement part |
| Features & Benefits - Bullet 7 | Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 2.16 |
| Length | 4.12 |
| Mounting Hardware Included | No |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake warning light is on. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Fluid spots beneath the car, indicating there may be a leak within the cylinder. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake cylinder signs of wear include: |
| Weight (lb) | 1.1 |
| Width (in) | 3.25 |
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov 