Rear Brake Wheel Cylinder - ACDelco (95910911)
- Sale Price: $40.85
Details
- Brand:
- SKU:
95910911
- GTIN: 00193468510553
- UPC: 193468510553
- Positions: Rear
- Other Names:
95910911
- Description: GM Genuine Parts Drum Brake Wheel Cylinders are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These wheel cylinders are pressure tested to ensure safe, confident braking. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Additional Information
| Brand | GM Genuine Parts |
| Attachment Type | Bolted |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | No |
| Bore Diameter | 0.874 22.22 |
| Casting Material | Aluminum |
| Features & Benefits - Bullet 1 | Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE) |
| Features & Benefits - Bullet 2 | GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors |
| Features & Benefits - Bullet 3 | GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle |
| Features & Benefits - Bullet 4 | GM regularly updates production and service part designs to integrate new materials and technologies |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Length | 2.68 68.19 |
| Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
| Mount Hole Quantity | 2 |
| Mounting Hardware Included | No |
| Outside Diameter | 1.157 29.4 |
| PADB ID 6385 | 0.393 10 |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake warning light is on. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Fluid spots beneath the car, indicating there may be a leak within the cylinder. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake cylinder signs of wear include: |
Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|