Disc Brake Rotor - Hella Pagid (355120801)
Details
- Brand:
- SKU:
355120801
- GTIN: 04082300513820
- UPC: 082300513820
- Positions: Rear
- Description: HELLA PAGID Brake Discs are designed to precisely reflect the requirements of various vehicle types, brake systems, engine outputs, driving loads, and braking characteristics.
Disc Brake Rotor
BRK DISC ROT
BMW 228i 2016-2014, 228i xDrive 2016-2015, 328i 2016-2012, 428i 2016-2014, 428i xDrive 2016-2014, M235i 2016-2014, M235i xDrive 2016-2015 - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Key Product Benefits
- Full range is 100% high carbon (GG15 & GG20)
- Full range is 100% fully coated with premium zinc rust protection
- Manufactured according to European OE specifications (AM1 & AM2)
- Improved aesthetics and appearance of brake discs, especially when used with aluminum rims
- Not oiled, no degreasing from preservative oil before fitting, saving time and money in the workshop
- Increased carbon content for increased heat conductivity and better mechanical properties
- Fixing screws are always included if required
- Less fading and quiet braking
- Reduced braking noise
- Higher driving comfort with reduced machining tolerances
- Better handling, driving comfort and less load on suspension parts through reduction of unsprung masses
- Increased fuel efficiency through weight reduction by up to 20%
Additional Information
| ABS Tone Ring Included | No |
| Assy./disassy. by qualified personnel required! | . |
| Balancing Type | Mill Balancing |
| Bearings Included | No |
| Bolt Hole Circle Ø [in] | 4.72 |
| Bolt Hole Circle Ø [mm] | 120 |
| Brake Disc Thickness [in] | 0.94 |
| Brake Disc Thickness [mm] | 24 |
| Brake Disc Type | Two-Piece Brake Disc |
| Brake Surface Finish | Slotted |
| Center Hole Diameter | 120.0 |
| Centering Diameter [in] | 2.95 |
| Centering Diameter [mm] | 75 |
| Construction | Composite |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Disc Finish | coated |
| Discard Thickness | 22.40 |
| Grade Type | Regular |
| Hat Finish | coated |
| Height [mm] | 66.1 |
| Hole Arrangement/Number | 05/06 |
| Inner diameter [mm] | 160.8 |
| Inside Diameter | 75.0 |
| Machining | High-Carbon |
| Material | gray cast iron & alum hat |
| Minimum thickness [mm] | 22.4 |
| Mounting Bolt Hole Circle Diameter | 120.00 |
| Mounting Bolt Hole Quantity | 6 |
| Nominal Thickness | 24.00 |
| Number of bolts/screws | 2 |
| Outer Diameter [in] | 13.58 |
| Outer diameter [mm] | 345 |
| Outside Diameter | 345.00 |
| Overall Height | 66.10 |
| Rust Resistant Coating | Yes |
| Solid Or Vented Type Rotor | Vented |
| Supplementary Article/Info 2 | without Ball Bearing |
| Surface | Coated |
| Surface Type | Smooth |
| Technical Information Number | 65143PRO_HC |
| UPC | 04082300513820 |
| Weight [kg] | 8.7 |
| Wheel Bolt Bore Ø [mm] | 16.5 |
Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|