Disc Brake Rotor - Hella Pagid (355132851)
Details
- Brand:
- SKU:
355132851
- GTIN: 04082300736670
- UPC: 082300736670
- Positions: Rear
- Description: HELLA PAGID Brake Discs are designed to precisely reflect the requirements of various vehicle types, brake systems, engine outputs, driving loads, and braking characteristics.
Disc Brake Rotor
BRK DISC ROT - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Key Product Benefits
- Full range is 100% high carbon (GG15 & GG20)
- Full range is 100% fully coated with premium zinc rust protection
- Manufactured according to European OE specifications (AM1 & AM2)
- Improved aesthetics and appearance of brake discs, especially when used with aluminum rims
- Not oiled, no degreasing from preservative oil before fitting, saving time and money in the workshop
- Increased carbon content for increased heat conductivity and better mechanical properties
- Fixing screws are always included if required
- Less fading and quiet braking
- Reduced braking noise
- Higher driving comfort with reduced machining tolerances
- Better handling, driving comfort and less load on suspension parts through reduction of unsprung masses
- Increased fuel efficiency through weight reduction by up to 20%
Additional Information
| ABS Tone Ring Included | No |
| Assy./disassy. by qualified personnel required! | . |
| Balancing Type | Mill Balancing |
| Bearings Included | No |
| Bolt Hole Circle Ø [in] | 4.72 |
| Bolt Hole Circle Ø [mm] | 120 |
| Brake Disc Thickness [in] | 0.79 |
| Brake Disc Thickness [mm] | 20 |
| Brake Disc Type | Two-Piece Brake Disc |
| Center Hole Diameter | 120.0 |
| Centering Diameter [in] | 2.95 |
| Centering Diameter [mm] | 75 |
| Construction | Composite |
| Directional or Non-Directional Brake Surface | Non-Directional |
| Disc Finish | Coated |
| Discard Thickness | 18.4 |
| Fitting Position | Rear Axle |
| Grade Type | Regular |
| Hat Finish | Coated |
| Height [mm] | 68.9 |
| Hole Arrangement/Number | 05/06 |
| Inner Diameter [in] | 7.24 |
| Inner diameter [mm] | 184 |
| Inside Diameter | 75.0 |
| Machining | High-Carbon |
| Material | Gray Cast Iron |
| Minimum thickness [mm] | 18.4 |
| Mounting Bolt Hole Circle Diameter | 120.0 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 20.0 |
| Outer Diameter [in] | 12.99 |
| Outer diameter [mm] | 330 |
| Outside Diameter | 330.0 |
| Overall Height | 68.9 |
| Rust Resistant Coating | Yes |
| Solid Or Vented Type Rotor | Vented |
| Supplementary Article/Info 2 | without Wheel Hub |
| Surface | Coated |
| Surface Type | Smooth |
| Technical Information Number | 56133PRO_HC |
| UPC | 04082300736670 |
| Weight [kg] | 8.6 |
| Wheel Bolt Bore Ø [mm] | 16.6 |
Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|