Holley Diecast In-Tank Carbureted RetroFit Fuel Pump Module-Returnless System - Holley (12-129)
Details
- Brand:
- SKU:
12-129
- GTIN: 00090127061282
- UPC: 090127061282
- Other Names:
Fuel tank, drop in, efi fuel, fuel pump, efi fuel pump, convert, in-tank,
- Description: Supports up to 700 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...
255 LPH Drop-In Retrofit Carbureted Fuel System Supports up to 700 Carb HP (HP Rating @ 6 PSI at 13.5 Volts / 10.4 AMP Draw)
It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation. - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Key Product Benefits
- The easiest way to convert your vehicle to an in-tank fuel system
- Installs in any fuel tank from 6.5” to 12” deep to fit a wide variety of applications
- The low profile 5 inch diameter design is only 1.275 inches thick above the tank mounting surface for added clearance when needed
- The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit
- The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride
- Die cast aluminum construction for corrosion resistance and long lasting good looks
- ¼” NPT ports for a wide variety of plumbing options
Additional Information
| Average Current Draw | 10.4 |
| Average Flow Rating | 255 |
| Connector Color | Black |
| Connector Gender | Male |
| Connector Quantity | 1 |
| Diameter | 4.8" |
| Fuel Filter Included | Yes |
| Fuel Sending Unit Included | No |
| Fuel System Type | Gasoline |
| Fuel Tank Pressure Sensor Included | No |
| Fuel Type | Gasoline |
| Gasket Or Seal Included | Yes |
| Gasket Or Seal Material | Foam |
| Grade Type | Performance |
| Height | Adjustable |
| Housing Material | Aluminum |
| In Tank or External | In Tank |
| Inlet Fitting Thread Size | 1/4 |
| Inlet Quantity | One |
| Inlet Type | NPT |
| Internal Or External Strainer | External |
| Lock Ring Included | Yes |
| Material | Die Cast Aluminum |
| Maximum Pressure | 6 |
| Mounting Hardware Included | Yes |
| Negative Ground | Yes |
| Outlet Fitting Thread Size | 1/4 |
| Outlet Quantity | One |
| Outlet Type | NPT |
| PADb ID 3294120 | California Proposition 65 |
| PADb ID 3294145 | 5 |
| PADb ID 3294148 | Fuel Pump |
| PADb ID 3294238 | 255 |
| PADb ID 3294240 | 1/4 NPT |
| PADb ID 5881167 | Air and Fuel Delivery |
| PADb ID 59964 | Universal |
| PADb ID 60509 | 67 |
| PADb ID 74442 | Limited 90 Day |
| PADb ID 81813 | Holley |
| Pump Type | Electric |
| Regulator Included | Yes |
| Top Mount Diameter | 5 |
| UPC | 00090127061282 |
| Voltage | 12 |
| Wire Harness Included | Yes |
| Wire Quantity | 2 |