Holley In-Tank Retrofit Fuel Module - 255 LPH - Holley (12-130)
- Sale Price: $1,172.94
Details
- Brand:
- SKU:
12-130
- GTIN: 00090127732151
- UPC: 090127732151
- Other Names:
Fuel tank, drop in, efi fuel, fuel pump, efi fuel pump, convert, in-tank,
- Description: Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...
255 LPH Drop-In Retrofit EFI Fuel System w/Hydramat Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)
It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation. *** Maximum 6AN line and fitting size due to space limitations between unit and fuel tank. - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Key Product Benefits
- The easiest way to convert your vehicle to an in-tank, EFI fuel system
- Installs in any fuel tank from 7” to 12” deep to fit a wide variety of applications
- The low profile 5 inch diameter design is only 1.275 inches thick above the tank mounting surface for added clearance when needed
- The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit
- The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride
- Includes innovative Holley Hydramat to ensure consistent fuel supply. The 3” x 15” HydraMat mounting flange has 6 clocking pin locations to allow for 360 degree adjustment to clear sending unit levels or any tank floor restrictions
- Black anodized aluminum construction for corrosion resistance and long lasting good looks
- ¼” NPT ports for a wide variety of plumbing options
- Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI or any TBI of EFI conversion
- Optional roll over valve available
- Two different fuel pumps are available to match your requirements - 255LPH or 400LPH for both return and returnless style systems
Additional Information
| Average Current Draw | 10.4 |
| Average Flow Rating | 255 |
| Connector Color | Black |
| Connector Gender | Male |
| Connector Quantity | 1 |
| Fuel Filter Included | Yes |
| Fuel Sending Unit Included | No |
| Fuel Tank Pressure Sensor Included | No |
| Fuel Type | Gasoline |
| Gasket Or Seal Included | Yes |
| Gasket Or Seal Material | Foam |
| Grade Type | Performance |
| Height | Adjustable |
| Housing Material | Aluminum |
| In Tank or External | In Tank |
| Inlet Fitting Thread Size | 1/4 |
| Inlet Quantity | One |
| Inlet Type | NPT |
| Internal Or External Strainer | External |
| Lock Ring Included | Yes |
| Material | Billet Aluminum |
| Maximum Pressure | 60 |
| Mounting Hardware Included | Yes |
| Negative Ground | Yes |
| Outlet Fitting Thread Size | 1/4 |
| Outlet Quantity | One |
| Outlet Type | NPT |
| PADb ID 3294145 | 5 |
| PADb ID 3294148 | Fuel Pump Module |
| PADb ID 3294238 | 255 |
| PADb ID 3294240 | 1/4 NPT |
| PADb ID 5866206 | 7 inches |
| PADb ID 5881167 | Air and Fuel Delivery |
| PADb ID 59964 | Universal |
| PADb ID 74442 | Limited 90 Day |
| PADb ID 81813 | Holley |
| Pump Type | Electric |
| Regulator Included | No |
| Top Mount Diameter | 5 |
| UPC | 00090127732151 |
| Voltage | 12 |
| Wire Harness Included | Yes |
| Wire Quantity | 2 |