21-23 Bronco Hoss 2.0 Pkg 2.5 Front Exp Coilover - ICON Vehicle Dynamics (48602)
Sale Price$535.55
Description : The 2021-2023 Ford Bronco EXP Series front shock absorbers by ICON Vehicle Dynamics combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the Bronco’s factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package.
EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Bronco’s OE upper shock and spring mounts.
The 6061-billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically design for fit each of the Bronco model’s OE coil springs. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0” to 2” of lift over stock on Bronco’s equipped with the OE HOSS 2.0 suspension package.
EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Bronco in conjunction with their stock coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
HOSS 2.0 is Ford's upgraded suspension system for Broncos of the Base, Big Bend, Outer Banks and Black Diamond trim levels WITH the optional Sasquatch package, and it is also standard on Badlands, Wildtrak, First Edition and Everglades. HOSS 2.0 is most easily identified by the YELLOW shock bodies of the OE shocks.
Based on ICON’s 2.5 Series, these EXP shocks bridge the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance, and maximum travel, all in one economical package.
48602
ICON 2021-2023 Ford Bronco, Hoss 2.0 Pkg, Front, 0-2” Lift, 2.5 EXP Series Coilover
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
Recommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset
Recommended Aftermarket Tires (Without Sasquatch Package): 35" x 12.50" (Requires high clearance crash bars, ICON part number 42000. 37" tire packagesrequire coilover bump stop spacers along with trimming and modifications)
Recommended Aftermarket Tires (With Sasquatch Package): 35" x 12.50" (37" tire packages require coilover bump stop spacers and may also require fender trimming and modifications)
APPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
APPLICATION NOTE #147: When running 37" tires use bump stop spacer kit part # 611082 in the front
TECH NOTE: Only compatible with 2021-2023 Ford Broncos equipped with HOSS 2.0 Suspension Package
TECH NOTE: EXP Coilovers are sold individually. A quantity of 2 are required per vehicle.
TECH NOTE: Recommend ICON High Clearance Crash Bar Kit, part number 42000, when running 35” tires on Broncos without Sasquatch package
TECH NOTE: When running 37” tires on Broncos without Sasquatch package crash bar removal may be required, but is not recommended
TECH NOTE: Lift heights above 1.5” over stock may require aftermarket front upper control arms to maintain ideal front end alignment
TECH NOTE: Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and/or injury.
TECH NOTE: Not compatible with Bronco Raptor
EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Bronco’s OE upper shock and spring mounts.
The 6061-billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically design for fit each of the Bronco model’s OE coil springs. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0” to 2” of lift over stock on Bronco’s equipped with the OE HOSS 2.0 suspension package.
EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Bronco in conjunction with their stock coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
HOSS 2.0 is Ford's upgraded suspension system for Broncos of the Base, Big Bend, Outer Banks and Black Diamond trim levels WITH the optional Sasquatch package, and it is also standard on Badlands, Wildtrak, First Edition and Everglades. HOSS 2.0 is most easily identified by the YELLOW shock bodies of the OE shocks.
Based on ICON’s 2.5 Series, these EXP shocks bridge the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance, and maximum travel, all in one economical package.
48602
ICON 2021-2023 Ford Bronco, Hoss 2.0 Pkg, Front, 0-2” Lift, 2.5 EXP Series Coilover
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
Recommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset
Recommended Aftermarket Tires (Without Sasquatch Package): 35" x 12.50" (Requires high clearance crash bars, ICON part number 42000. 37" tire packagesrequire coilover bump stop spacers along with trimming and modifications)
Recommended Aftermarket Tires (With Sasquatch Package): 35" x 12.50" (37" tire packages require coilover bump stop spacers and may also require fender trimming and modifications)
APPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
APPLICATION NOTE #147: When running 37" tires use bump stop spacer kit part # 611082 in the front
TECH NOTE: Only compatible with 2021-2023 Ford Broncos equipped with HOSS 2.0 Suspension Package
TECH NOTE: EXP Coilovers are sold individually. A quantity of 2 are required per vehicle.
TECH NOTE: Recommend ICON High Clearance Crash Bar Kit, part number 42000, when running 35” tires on Broncos without Sasquatch package
TECH NOTE: When running 37” tires on Broncos without Sasquatch package crash bar removal may be required, but is not recommended
TECH NOTE: Lift heights above 1.5” over stock may require aftermarket front upper control arms to maintain ideal front end alignment
TECH NOTE: Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and/or injury.
TECH NOTE: Not compatible with Bronco Raptor
- Return Policy
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Installation GuideDescription
The 2021-2023 Ford Bronco EXP Series front shock absorbers by ICON Vehicle Dynamics combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the Bronco’s factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package.
EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Bronco’s OE upper shock and spring mounts.
The 6061-billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically design for fit each of the Bronco model’s OE coil springs. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0” to 2” of lift over stock on Bronco’s equipped with the OE HOSS 2.0 suspension package.
EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Bronco in conjunction with their stock coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
HOSS 2.0 is Ford's upgraded suspension system for Broncos of the Base, Big Bend, Outer Banks and Black Diamond trim levels WITH the optional Sasquatch package, and it is also standard on Badlands, Wildtrak, First Edition and Everglades. HOSS 2.0 is most easily identified by the YELLOW shock bodies of the OE shocks.
Based on ICON’s 2.5 Series, these EXP shocks bridge the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance, and maximum travel, all in one economical package.
48602
ICON 2021-2023 Ford Bronco, Hoss 2.0 Pkg, Front, 0-2” Lift, 2.5 EXP Series Coilover
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
Recommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset
Recommended Aftermarket Tires (Without Sasquatch Package): 35" x 12.50" (Requires high clearance crash bars, ICON part number 42000. 37" tire packagesrequire coilover bump stop spacers along with trimming and modifications)
Recommended Aftermarket Tires (With Sasquatch Package): 35" x 12.50" (37" tire packages require coilover bump stop spacers and may also require fender trimming and modifications)
APPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
APPLICATION NOTE #147: When running 37" tires use bump stop spacer kit part # 611082 in the front
TECH NOTE: Only compatible with 2021-2023 Ford Broncos equipped with HOSS 2.0 Suspension Package
TECH NOTE: EXP Coilovers are sold individually. A quantity of 2 are required per vehicle.
TECH NOTE: Recommend ICON High Clearance Crash Bar Kit, part number 42000, when running 35” tires on Broncos without Sasquatch package
TECH NOTE: When running 37” tires on Broncos without Sasquatch package crash bar removal may be required, but is not recommended
TECH NOTE: Lift heights above 1.5” over stock may require aftermarket front upper control arms to maintain ideal front end alignment
TECH NOTE: Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and/or injury.
TECH NOTE: Not compatible with Bronco Raptor
EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Bronco’s OE upper shock and spring mounts.
The 6061-billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically design for fit each of the Bronco model’s OE coil springs. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0” to 2” of lift over stock on Bronco’s equipped with the OE HOSS 2.0 suspension package.
EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Bronco in conjunction with their stock coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
HOSS 2.0 is Ford's upgraded suspension system for Broncos of the Base, Big Bend, Outer Banks and Black Diamond trim levels WITH the optional Sasquatch package, and it is also standard on Badlands, Wildtrak, First Edition and Everglades. HOSS 2.0 is most easily identified by the YELLOW shock bodies of the OE shocks.
Based on ICON’s 2.5 Series, these EXP shocks bridge the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance, and maximum travel, all in one economical package.
48602
ICON 2021-2023 Ford Bronco, Hoss 2.0 Pkg, Front, 0-2” Lift, 2.5 EXP Series Coilover
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
Recommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset
Recommended Aftermarket Tires (Without Sasquatch Package): 35" x 12.50" (Requires high clearance crash bars, ICON part number 42000. 37" tire packagesrequire coilover bump stop spacers along with trimming and modifications)
Recommended Aftermarket Tires (With Sasquatch Package): 35" x 12.50" (37" tire packages require coilover bump stop spacers and may also require fender trimming and modifications)
APPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
APPLICATION NOTE #147: When running 37" tires use bump stop spacer kit part # 611082 in the front
TECH NOTE: Only compatible with 2021-2023 Ford Broncos equipped with HOSS 2.0 Suspension Package
TECH NOTE: EXP Coilovers are sold individually. A quantity of 2 are required per vehicle.
TECH NOTE: Recommend ICON High Clearance Crash Bar Kit, part number 42000, when running 35” tires on Broncos without Sasquatch package
TECH NOTE: When running 37” tires on Broncos without Sasquatch package crash bar removal may be required, but is not recommended
TECH NOTE: Lift heights above 1.5” over stock may require aftermarket front upper control arms to maintain ideal front end alignment
TECH NOTE: Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and/or injury.
TECH NOTE: Not compatible with Bronco Raptor
Features & Benefits
- Vehicle specific design for 2021-2023 Ford Bronco with HOSS. 2.0 Suspension Package
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoir
- Adjustable ride heights from 0-2” of front lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- One-piece, impact extruded, hard anodized aluminum cylinder offer excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- High strength alloy CNC machined lower bar pin
- 100% Bolt-on - no cutting or welding necessary for installation
- Fully rebuildable and re-tunable
Part Number (MPN)
48602
SKU
48602
UPC / GTIN
840103414300 / 00840103414300
Condition
New
Position
Front
Disclaimer
WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
AAP_UDA_12
EA
AAP_UDA_22
1
AAP_UDA_4
55
Active or Passive Suspension
Passive
Add-On Part
611082 - EXP 1" SHAFT BUMP EXTENSION<br />48500DJ - 21-23 BRONCO BILLET UCA DJ PRO KIT<br />42000 - 21-23 BRONCO HIGH CLEARANCE CRASH BAR KIT<br />45212 - 21-23 BRONCO XD TIE ROD KIT<br />48400DJ - 21-23 BRONCO TUBULAR UCA DJ PRO KIT
Adjustable Compression
No
Adjustable Damping
NO
Adjustable Rebound
No
Adjustable Ride Height
Yes
Assembled
No
Body Diameter
2.5
California Prop 65 Warning
Yes
Coil Over Springs Included
No
Coil Spring Included
No
Coil Spring Insulator(s) Included
No
Compressed Length
16.93
Cylinder Color
Gray
Cylinder Finish
Hard Anodized
Cylinder Material
Aluminum
Cylinder Outside Diameter
2.5
Damping Type
Oil
Dust Shield Included
No
Extended Length
23.5
Gas Charged
Yes
Grade Type
Performance
Includes Bump Stop
Yes
Internal Construction Type
Single Tube
Lower Mount Type
BAR PIN
Material
Steel<br />Aluminum
Maximum Lift
2
Maximum Ride Height Raising Distance
2
Minimum Lift
0
OEM Wheels & Tires Fitment
Yes
Recommended Aftermarket Tires
(Without Sasquatch Package): 35" x 12.50" (Requires high clearance crash bars, ICON part number 42000. 37" tire packages require trimming and modifications)<br />(With Sasquatch Package): 35" x 12.50" (37" tire packages may require fender trimming and modifications)
Recommended Aftermarket Wheels
(Without Sasquatch Package): ICON Alloys - 17x8.5" w/ 5.75" Backspace / 25mm Offset<br />(With Sasquatch Package): ICON Alloys - 20x9" w/ 5" Backspace / 0mm Offset<br />(With Sasquatch Package): ICON Alloys - 17x8.5" w/ 4.75" Backspace / 0mm Offset<br />(With Sasquatch Package): ICON Alloys - 18x9" w/ 5" Backspace / 0mm Offset
Remote Reservoir
NO
Reservoir Style
Internal
Self-Leveling
No
Service Parts
252010 - 2.5 IFP REBUILD KIT
Shaft Diameter
0.875
Shaft Material
Chrome
Shock Absorber Body End Measuring Point
Top of Upper Mount Plate
Shock Absorber Rod End Measuring Point
Flat on Bar Pin
Title
ICON 2021-2023 Ford Bronco, Hoss 2.0 Pkg, Front, 0-2” Lift, 2.5 EXP Series Coilover
Travel Length
6.57
Upper Mount Type
Mounting Plate
Valving Type
Digressive
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission
| Brand | Equivalent Part Numbers |
|---|---|
BrandEquivalent Part Numbers
BQNV
24318594
Bilstein
24-318594
Shipping Policy
Operated by RevolutionParts Inc · Effective date: 11/2025 · Last updated: 4/2026... Check out our Shipping Policy for more details.
Return Policy
At PartsDirect.parts, operated by RevolutionParts Inc, we want you to be completely satisfied with your purchase. This policy outlines how to cancel orders, initiate returns, and receive refunds. Please read it carefully before completing your purchase... Check out our Return Policy for more details.