23-25 Fsd 2.5 Pb Centerline Stabilizer Kit - ICON Vehicle Dynamics (65053)
Sale Price$1,038.88
Description : The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.
Features a 2.5 Series shock with through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers. This unit provides a significant increase in steering damping compared to the stock equipment.
65053
ICON 2023-2025 F-250/F-350 Ford Super Duty 4WD, 2.5 Centerline Steering Stabilizer Kit, Piggyback Reservoir
APPLICATION NOTE #1: Only fits 4WD models
TECH NOTE: After installation, cycle steering left and right to ensure full range of steering is achievable and stabilizer is installed correctly
TECH NOTE: Use ICON 1” front bump stop spacers, part # 61112 (included with kit), unless the suspension system that you are using calls for larger bump stop spacers. If using a non-ICON configuration, cycle the suspension to verify that the stabilizer does not make contact upon full compression.
TECH NOTE: Mounts over stock front differential cover, not compatible with most aftermarket covers.
TECH NOTE: Not compatible with aftermarket tie rods
TECH NOTE: Not compatible with F-450/F-550. For F-450/F-550 fitment, consider part number 65054.
Features a 2.5 Series shock with through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers. This unit provides a significant increase in steering damping compared to the stock equipment.
65053
ICON 2023-2025 F-250/F-350 Ford Super Duty 4WD, 2.5 Centerline Steering Stabilizer Kit, Piggyback Reservoir
APPLICATION NOTE #1: Only fits 4WD models
TECH NOTE: After installation, cycle steering left and right to ensure full range of steering is achievable and stabilizer is installed correctly
TECH NOTE: Use ICON 1” front bump stop spacers, part # 61112 (included with kit), unless the suspension system that you are using calls for larger bump stop spacers. If using a non-ICON configuration, cycle the suspension to verify that the stabilizer does not make contact upon full compression.
TECH NOTE: Mounts over stock front differential cover, not compatible with most aftermarket covers.
TECH NOTE: Not compatible with aftermarket tie rods
TECH NOTE: Not compatible with F-450/F-550. For F-450/F-550 fitment, consider part number 65054.
- Return Policy
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Installation GuideDescription
The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.
Features a 2.5 Series shock with through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers. This unit provides a significant increase in steering damping compared to the stock equipment.
65053
ICON 2023-2025 F-250/F-350 Ford Super Duty 4WD, 2.5 Centerline Steering Stabilizer Kit, Piggyback Reservoir
APPLICATION NOTE #1: Only fits 4WD models
TECH NOTE: After installation, cycle steering left and right to ensure full range of steering is achievable and stabilizer is installed correctly
TECH NOTE: Use ICON 1” front bump stop spacers, part # 61112 (included with kit), unless the suspension system that you are using calls for larger bump stop spacers. If using a non-ICON configuration, cycle the suspension to verify that the stabilizer does not make contact upon full compression.
TECH NOTE: Mounts over stock front differential cover, not compatible with most aftermarket covers.
TECH NOTE: Not compatible with aftermarket tie rods
TECH NOTE: Not compatible with F-450/F-550. For F-450/F-550 fitment, consider part number 65054.
Features a 2.5 Series shock with through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers. This unit provides a significant increase in steering damping compared to the stock equipment.
65053
ICON 2023-2025 F-250/F-350 Ford Super Duty 4WD, 2.5 Centerline Steering Stabilizer Kit, Piggyback Reservoir
APPLICATION NOTE #1: Only fits 4WD models
TECH NOTE: After installation, cycle steering left and right to ensure full range of steering is achievable and stabilizer is installed correctly
TECH NOTE: Use ICON 1” front bump stop spacers, part # 61112 (included with kit), unless the suspension system that you are using calls for larger bump stop spacers. If using a non-ICON configuration, cycle the suspension to verify that the stabilizer does not make contact upon full compression.
TECH NOTE: Mounts over stock front differential cover, not compatible with most aftermarket covers.
TECH NOTE: Not compatible with aftermarket tie rods
TECH NOTE: Not compatible with F-450/F-550. For F-450/F-550 fitment, consider part number 65054.
Features & Benefits
- Through shaft design eliminates the push/pull sensation associated with traditional stabilizers
- Provides symmetrical steering feel throughout input range
- Drastically increased steering damping over stock unit
- Offers increased wheel travel compared to ICON's dual steering stabilizer kit
- Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock
- Piggyback reservoir design
- 6061 hard anodized aluminum shock body provides excellent corrosion resistance
- 7/8” chrome plated induction-hardened steel shaft
- 5WT shock oil for consistent suspension damping along a wide temperature range
- FK Rod End bearings for precise function & feel throughout steering range
- 100% bolt-on installation
Part Number (MPN)
65053
SKU
65053
UPC / GTIN
840103423876 / 00840103423876
Condition
New
Position
Front
Disclaimer
WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
AAP_UDA_12
EA
AAP_UDA_22
1
AAP_UDA_4
55
Adjustable Damping
No
Boot Included
No
California Prop 65 Warning
Yes
Cylinder Diameter
2.5
Cylinder Material
Aluminum
Damping Type
Oil
Grade Type
Performance
Lower Mount Type
Eyelet
Mounting Bracket Included
yes
Shaft Diameter
0.875
Shaft Material
Chrome
Steering Stabilizer Configuration
Through-Shaft
Title
ICON 2023-2025 F-250/F-350 Ford Super Duty 4WD, 2.5 Centerline Steering Stabilizer Kit, Piggyback Reservoir
Upper Mount Type
Clamp
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission
Shipping Policy
Operated by RevolutionParts Inc · Effective date: 11/2025 · Last updated: 4/2026... Check out our Shipping Policy for more details.
Return Policy
At PartsDirect.parts, operated by RevolutionParts Inc, we want you to be completely satisfied with your purchase. This policy outlines how to cancel orders, initiate returns, and receive refunds. Please read it carefully before completing your purchase... Check out our Return Policy for more details.