Details
- Brand:
- SKU:
911550
- GTIN: 00048598247278
- UPC: 048598247278
- Positions: Rear
- Description: Ideal for vehicles with a higher center of gravity, Monroe® Reflex® light truck shock absorber ASD valving technology automatically adjusts the unit to absorb the impact, helping to reduce vehicle roll and dive. Designed to restore a vehicle’s original factory ride drivability and performance, these units provide greater control for improved handling and vehicle stability.
Monroe Reflex 911550 Rear Suspension Shock Absorber for Jeep Wrangler
Reflex Shock Absorber
Reflex Rear Suspension Shock Absorber - Condition: New
Key Product Benefits
- IMPROVES STABILITY -- ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
- EXCEPTIONAL HANDLING -- Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONSISTENT RIDE -- OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
- CONTROL AND DURABILITY -- PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE -- Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
- BUILT TO LAST -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE -- Comes with Monroe’s Limited Lifetime Warranty and exclusive Feel the Difference™ Guarantee
Additional Information
| Brand | Monroe Shocks and Struts Reflex |
| UPC | 00048598247278 |
| Compressed Length | 17.34 440.3 |
| Extended Length | 25.93 658.7 |
| Travel Length | 8.59 218.4 |
| Shock Stroke | 8.59 218.4 |
| Lower Mount Type | Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 1 9/16" Sleeve OAL |
| Lower Mount Code | LS117 |
| Upper Mount Type | Loop Bushing and Sleeve Mount - 1/2" Sleeve ID X 2 3/4" Sleeve OAL |
| Upper Mount Code | LS97 |
| Shock Absorber Rod End Measuring Point | Center of Loop |
| Shock Absorber Body End Measuring Point | Center of Loop |
| Gas Charged | Yes |
| Mounting Hardware Included | No |
| Body Diameter | 1.97 50 |
| Cylinder Outside Diameter | 1.97 50 |
| Body Material | Steel |
| Cylinder Material | Steel |
| Body Color | Black |
| Cylinder Color | Black |
| Finish | Painted |
| Cylinder Finish | Painted |
| Boot Included | Yes |
| Dust Shield Included | Yes |
| Dust Shield Diameter | 3.05 75.5 |
| Dust Shield Material | Plastic |
| Dust Shield Color | Black |
| Rod Diameter | 0.55 14 |
| Shaft Material | Chrome |
| Shock Absorber Bore Size | 1.81 46 |
| Includes Bump Stop | No |
| Internal Rebound Bumper | Yes |
| Internal Rebound Spring | No |
| Hydraulic Lockout | No |
| Internal Construction Type | Single Tube |
| Grade Type | Performance |
| Adjustable Damping | No |
| Active or Passive Suspension | Passive |
| Adjustable Compression | No |
| Adjustable Rebound | No |
| Valving Type | Progressive |
| Self-Leveling | No |
| Adjustable Ride Height | No |
| Maximum Ride Height Lowering Distance | 0 |
| Maximum Ride Height Raising Distance | 0 |
| Air Adjustable | No |
| Air Ride Suspension | No |
| Bladder(s) Included | No |
| Bladder Sleeve(s) Included | No |
| Bladder Heavy Duty Crimping Rings Included | No |
| New Or Remanufactured | New |
| Coil Over Springs Included | No |
| Bearing Plate Included | No |
| Spring Included | No |
| Coil Spring Insulator(s) Included | No |
| Spring Isolators Included | No |
| Spring Seat Included | No |
| Remote Reservoir | No |
| Strut Mount Insulator(s) Included | No |
Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|